Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3. BATTERY INFORMATION
3.1 Installing the batteries.
1) Balance Master Robot requires 4 x AAA batteries and the remote control requires 2 x AA
batteries. (4xAAA and 2 x AA batteries are included)
2) Using a phillips screwdriver remove the screws on the battery compartment cover
located on the back of the robot.
3) Insert the batteries the correct way round, ensuring the positive and
negative polarities match the image inside the battery compartment.
4) Replace the battery compartment cover and tighten screws using
the screwdriver. CAUTION: Take care not to over tighten screws.
Remove the screws
3.2 Important battery information.
1) Use only brand new batteries of the correct size and power.
2) Do not mix old and new batteries, different types of batteries (zinc, alkaline or
rechargeable).
3) If using rechargeable batteries, ensure they are all the same capacity.
4) Do not try and charge non-rechargeable batteries.
5) Rechargeable batteries should be charged by an Adult or under Adult supervision. Stop
charging immediately if you notice any abnormal behaviour.
6) Do not throw batteries in the fire.
7) Replace all batteries of the same type/brand at the same time.
8) The supply terminals are not to be short circuited.
9) Remove empty batteries from the product.
10) Batteries should be changed by an Adult.
11) If the robot is going to be inactive for a long period of time, please remove all batteries.
12) For your safety, please operate according to these instructions.
3.3 Low battery indicators.
1) When the batteries start to weaken the Balance Master Robot will move very slowly and
will easily fall down whilst moving and turning. When this happens, turn off the unit and
replace all of the batteries.
2) Balance Master Robot will make a low battery indication sound and power off when the
batteries are nearly empty.
6
Take out the
battery compartment
Insert 4x AAA
batteries
Capítulos
Tabla de contenido
Solución de problemas
