Idiomas disponibles
Idiomas disponibles
MODEL:
NOO-E14, VOO-E14
NOZ-E14, VOZ-E14
NOS-E14, VOS-E14
NZS-E14, VZS-E14
ENG |
INSTRUCTIONS
Before using or installing the product, kindly read the instructions and follow safety rules. Installation should be provided by
qualified person or company.
Thank you for choosing the item of company PANLUX s.r.o.
Technical data
Location: exteriors
Material: plastic PP/PMMA
Notice
Before using, check the product and make sure that it is not damaged, otherwise do not use it. Before every manipulation
make sure that mains electrical supply is disconnected. In case of damage do not repair or disassemble the product. Before
replacing the light source switch off the light and let it cool down. Kindly use only recommended light sources.
Infringement of any mentioned instruction can cause harm to health or property.
NOS-E14, VOS-E14, NZS-E14, VZS-E14
For the best functional results, move toward the sensor (see to pic. 7). The incorrect function of the product can be caused
by interruption of electromagnetic field, small temperature difference between moving object and surroundings, reflection
(e.g. strong luminous source).
Installation
PIR SENZOR
100 mm
100 mm
H
O
2
1
H
O
2
H
O
H
O
2
2
230V
MA X
MAX
E14
~50Hz
60W
11W
Principle of PIR sensor
PIR sensor receives infra-red waves emitted by objects in reach radius. With movement in the detection area sensor notices
the change and initiates trigger order „Light on" for adjusted time.
Reach setting (sensitivity) – SENS (max. 7m, adjustable)
Reach is to be understood as the area traced out by angle of detection and min. to max. available distance from sensor.
Reach can be changed by knob.
Time setting (switch-off delay) – TIME (10s (±5s) to 4min (±1min), adjustable)
The countdown of adjusted time begins after last detected movement. We recommend setting the function on minimum
during functional test.
Twilight setting (response threshold) – aprox. 10lx
We recommend setting the function on maximum during test.
Stated information may differ according to position and installation height.
Position marked - or applies to minimum and position marked
Warranty voids if the product is mechanically damaged or connected unprofessionally.
2
3
terminal box connection
(see to pic. 2)
SENS
TIME
IP44
or
+
4
5
All rights reserved
Technical data can be changed without previous notice.
GARD
LUX
max. 60W
max. 200W
1,5mm
2
applies to maximum.
6
7m
2m
90˚
2m
7m
7m
2m
0m
UM_GARD_150707
