Function; Navigenio As A Cooking Plate; Manual Cooking; With Visiotherm - AMC Navigenio Manual Del Usuario

EN
Residual heat display:
If the residual heat display disappears, the glass-ceramic field has cooled down enough that there is no
longer any risk of burns.
Residual heat display is only active when the Navigenio is connected to the power supply.
If, after switching off the appliance, the power cord is disconnected from the power supply,
there is a risk of burns.
3.

Function

3.1

Navigenio as a cooking plate

Only suitable pans as described in Chapter 1.1.1.
3.1.1

Manual cooking

With Visiotherm

The temperature is measured and displayed on the Visiotherm.
The user controls the temperature and operates the Navigenio.

With Visiotherm and Audiotherm

The measured temperature and set cooking time are displayed on
the Audiotherm; the Audiotherm beeps to indicate when something
needs to be done. The user operates the Navigenio.
3.1.2

Self-controlled cooking

Via a radio link to the Navigenio, the Audiotherm independently
controls the entire cooking process. After switching on the Navigenio
to "A" and setting the Audiotherm, the operation of the Navigenio and
Audiotherm is overtaken.
Also follow the descriptions and tips in the "Cooking with AMC"
brochure and the Audiotherm User Manual.

Planned cooking

In self-controlled operation, the Audiotherm can be set to level "A"
with the Navigenio so that the Navigenio heating process switches
on at a later time (start delay).
Also follow the descriptions and tips in the "Cooking with AMC"
brochure and the Audiotherm User Manual.
ƒ Make sure that there is always a pot or pan on the
ƒ Make sure that there are no other objects (e.g., towels or
ƒ Make sure that the selected lids are always properly
16
Navigenio.
paper) or no living entities on the Navigenio.
attached or sealed.
1 ....... 6
A