Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Connecting Antennas
Two antennas allow the Spectrum Manager to capture scan data and analyze the
RF signals used in diversity receiver applications. If active antennas are used, set
Antenna DC Power to On.
To use front-mounted antennas:
1. Insert the bulkhead adapters on the supplied front-mounting cables through
the holes in each bracket and secure them from the front using the supplied
hardware.
2. Connect the supplied antenna cables to the antenna input BNC connectors on
the rear panel.
Home Menu Screen
During operation, the home menu screen displays the following indicators:
1
Event Log
* Event 1
* Event 2
* Event 3
* Event 4
Data Display Screen
During operation, the data display shows the backup frequency monitoring screen. When the Scanning function is active, the display shows the RF plot. When the Listen
feature is active, the display shows a graphic representation of signal strength for a selected frequency.
Axient Frequency Monitoring
1
Band
G1 H4 J5 L3
In Use
2
6
10
Ready
12
4
3
2
3
Wizard
4
Manual
5
▲
Util
6
CFL
7
▼
More
4
4
6
6
10
Mounting Instructions
This component is designed to fit into an audio rack.
WARNING: To prevent injury this apparatus must be securely attached to the rack.
① Event Log
Records Spectrum Manager functions
during operation.
② Network Icon
Indicates connectivity with other devices
on the network.
Note: IP address must be valid to enable
networked control.
③ Scroll Arrows
Indicates additional log entries listed
above or below.
④ Wizard Sub-menu
Accesses the following wizard functions:
• All New
• Update Freqs
• Update Devices
① Band
Lists frequency bands for Axient devices controlled by the
Spectrum Manager
② In Use
Lists the number of CFL frequencies used by devices
controlled by the Spectrum Manager
③ Ready
Lists the number of frequencies that are currently clear and
can be deployed
④ More
Indicates additional frequency band entries are available
6
⑤ Manual Sub-menu
Accesses the following menus:
• Devices
• Scans
• Listen
⑥ Util Sub-menu
Accesses the following menus:
• Display
• Network
• Lock
• More (additional functions)
⑦ CFL Sub-menu
Accesses the following menus:
• New
• Edit
• More (including Analyze and Clear)
• Deploy
Tabla de contenido
