Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Operation of an engine equipped with an A4 and / or C4-T panel:
To start the engine :
1. Put the throttle in the neutral position.
2. Put the key into the ON/STOP ignition.
3. Turn the key a quarter turn to the right. All the warning lights will come on and it will make a sound signal. This
stage allows you to check that these elements are working properly. After a few moments, only the oil alert and battery
charge lights will remain on.
4. Press the START button at halfway to start preheating. Hold the button for 5 to 15 seconds, depending on
ambient temperature, in order to let the engine preheat. Press fully to start the engine.
I
Warning !: Never press the START button when the engine is running.
Stopping the engine:
Turn the key counter clockwise. The engine switches off and all the warning lights go out.
The operation of the A3 and C3 panel is explained in the user manual reference 970313180 that is also delivered with
the engine.
A3 Fly Bridge Common Rail
C3 Common Rail
11
STOP
START
A4 Fly Bridge
20
15
25
RPM x 100
10
30
5
35
0
40
C4-T
20
25
15
RPM x 100
10
5
0
2
3
1
4
5
40
20
0
60
0
80
ON / STOP
bar
psi
!
STOP
Instrument panel
ON / STOP
START
STOP
30
35
!
40
80
100
60
40
180
220
120
105
250
START
°C
°F
!
Tabla de contenido
