Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

3. Paired devices remain paired even when:
• One of the devices is not turned on.
• A service connection is interrupted or the service stopped.
• One or both devices are rebooted.
Connection
In some cases the Blue Switch can be disconnected from your phone and you will need to restore
the connection.
• If the Blue Switch has been switched off: Switch on the power and the connection will be restored
automatically.
• If the mobile phone has been switched off: Turn on the mobile phone and restore the connection
via the phone's menu or press the Central button once.
• If one of the two devices has been out of range: Make sure that both devices are within working
range and press the Central button once.
Disconnection
You can disconnect the headset from your phone when, for example, you want to use another
Bluetooth
device with your phone. The Blue Switch can be disconnected in the following ways:
®
1. Switch off the Blue Switch.
2. Disconnect the headset in the phone's menu.
3. Move the phone more than 10 meters away from the headset.
Turning on:
Press and hold (3 sec) the Central button (1) until you hear a beep tone and the blue LED indicator
(3) starts fl ashing.
When the headset is in the cradle (carkit mode), it will switch on automatically when the ignition is
turned on.

Turning off:

Press and hold (3 sec) the Central button (1) until you hear a beep tone and the red LED indicator
(3) lights up briefl y before turning off again.
Answer a call:
Press the Central button (1) to answer a call.
Note:
Due to the different design of some mobile phones, an auto-disconnect may happen even when the
GB-18
Tabla de contenido
loading

Tabla de contenido