Technical Characteristics; Measuring Range; Maintenance And Cleaning - Lanaform 4 in 1 Thermometer Manual Del Usuario

4. Insert the tip of the thermometer into the ear canal and keep the «On» button (A) pressed. An
arrow appears at the top of the LCD screen indicating that the temperature is being taken.
EN
5. Wait for the audible signal indicating that detection has finished. The temperature read is then
displayed on the screen.
6. The detection range of the «4 in 1 Thermometer» goes from 32°C to 43°C. The ear thermometer
will give a correct measurement if the temperature detected is greater than 32°C.
7. In order to obtain a more accurate temperature reading, wait for five seconds between readings.
TAKINg THE FOREHEAD TEMPERATURE:
1. When taking the forehead temperature you must not remove the cover from the sensor.
2. Press the «On» button an initial time in order to activate the thermometer and select forehead
temperature mode as explained above.
3. Wait until you hear 2 audible «beeps» indicating that the temperature can be taken. The last
measurement taken then appears on the screen.
4. Apply the tip of the thermometer to the forehead and keep the «On» button (A) pressed.
An arrow appears on the screen. Then slide the thermometer across the whole length of the
forehead and release the «On» button. A new audible signal sounds indicating that detection has
finished. The temperature read is then displayed on the screen.

TECHNICAL CHARACTERISTICS

Normal conditions of use
Display resolution
Operating temperature
Storage temperature
Humidity rate
Power supply

Measuring range

Accuracy

MAINTENANCE AND CLEANINg

- When you need to take a new reading and in order to ensure accuracy and hygiene, always clean
the tip of the sensor with a cotton bud moistened with alcohol (figure 5).
8
Version 01 dated 01/09/2010
0.1°C
16 to 40°C
-20 to 50°C
<95%
3V DC (1 «CR2032» battery)
32.0 to 43 °C
± 0.3°C (32.0-35.9°C)
± 0.2°C (36.0-39.0°C)
± 0.3°C (39.1-42.5°C)