Scope - Rehau EVERLOC+ Serie Instrucciones Del Producto

1. SCOPE

Thank you for your purchase. These instructions contain information
about the assembly and use of the EVERLOC+™ compression-sleeve
®
system with RAUPEX UV shield pipe (PEXa Pipe) intended for use in
hot- and cold-water potable systems and RAUPEX O
hydronic heating and cooling systems.
For professional use only. Persons using this guide must be experi-
enced and appropriately licensed professional contractors who
understand the principles and practices associated with the proper
installation of hot- and cold-water potable and hydronic systems.
The information presented in this product instruction manual is
intended to demonstrate the proper assembly method and installation
recommendations for the EVERLOC+ compression-sleeve system.
Allow only persons who fully understand this manual to participate in
the assembly and use of the EVERLOC+ compression-sleeve system
with RAUPEX PEXa pipe.
It is the responsibility of the licensed contractor to check the prevailing
local codes and to verify that the technical information presented in
this guide is appropriate for a particular installation.
Nothing in this manual supersedes national or local code requirements
or the recommendations of other manufacturers regarding their
components. Observe all applicable national, state and local laws,
regulations, standards, codes and ordinances. If you believe REHAU
product information conflicts with applicable code requirements,
industry standards, or the recommendations of other manufacturers
regarding their components, contact the REHAU distributor in your
area and consult with the building authority having jurisdiction before
installing the EVERLOC+ compression-sleeve system.
Before starting the installation process, read the REHAU PEXa Limited
Warranty, available at www.na.rehau.com/warranties. It can also be
obtained from your authorized REHAU distributor or by writing to
REHAU Construction LLC, 1501 Edwards Ferry Road NE, Leesburg VA
20176 US.
Proper installation is the responsibility of the installing contractor.
Review the REHAU Technical Guidelines prior to installation of the
REHAU crosslinked polyethylene (PEXa) piping system. REHAU
Technical Guidelines are defined in the REHAU PEXa Limited Warranty
as: The most current and applicable versions of all the technical
literature available on the REHAU North America website at www.
na.rehau.com/resourcecenter, including, but not limited to, technical
manuals, instruction guides, technical bulletins, submittals and
REHAU Academy training presentations. Check the REHAU Resource
Center (www.na.rehau.com/resourcecenter) for the latest updates.
Contact the EVERLOC+ distributor in your area if you do not under-
stand the information in this manual or if you have questions about
the REHAU Technical Guidelines.
Barrier pipe for
2
This manual contains safety-related information that requires your
special attention. It is indicated with the safety alert symbol and the
signal words described below: :
DANGER
WARNING
CAUTION
NOTICE
Only trained personnel should be engaged in the installation process.
Follow the instructions in this manual and other REHAU Technical
Guidelines and use common sense to reduce the risk of injury or
property damage.
WARNING
WARNING
Indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not
avoided, could result in death or serious
injury.
Indicates a hazardous situation which, if not
avoided, could result in minor or moderate
injury.
Indicates a risk of property damage,
including damage to the power tool or its
individual components.
Read the instruction manual for the EVERLOC+
compression-sleeve tools before use and follow all
safety precautions - improper use can cause serious
personal injury
EVERLOC+ compression-sleeve tools use a strong
hydraulic force to expand PEXa pipe and compress
components of the REHAU EVERLOC+ compressi-
on-sleeve system.
To reduce the risk of crush and laceration injury,
keep fingers, hands and all parts of your body away
from the expander head, hydraulic slide and
compression jaws during operation. Remove the
battery before attempting to change or adjust the
expander head or compression jaws.
3