Tabla de contenido
Door Handle Adjustment
Certain models are equipped with an adjustable door latch. For correct operation, the stove door
must be airtight when closed. To adjust the door handle latch:
1.
Loosen the locking nut
2.
Adjust the bolt in or out as required. The adjustment should be made in such way that
when the handle is in its closed position the door is airtight.
3.
Retighten the locking nut.
Handle shaft
Other Maintenance
Clean the unit, the flue outlet, and the chimney at the end of each heating season or more often if
the use of the stove, or the fuel make it necessary.
For cleaning purposes the baffle plates can be removed without any tools. This gives access to
the cleaning flap of the smoke flue and it is even possible to reach the flue outlet.
Summer Shut Down
Ashes shall be removed, and disposed of in a steel container with a tightly fitting lid and moved
outdoors immediately. Other waste shall not be placed in this container.
Remove all remaining ash and cinders from the unit, close all the stove doors. If the room is
damp, possibly place some absorbent crystals inside the stove and/or disconnect it completely
from the chimney.
Crazing of Porcelain Enamel
Porcelain enamel, when heated to high temperature, is subject to crazing. Crazing is a normal
occurrence when enamel is exposed to high temperatures. Your enamel finish will not be harmed nor
will the function of the stove be impaired.
58
Latch
Adjustment bolt
Locking nut
Tabla de contenido
