Installation - Xoro HSD 7580 Manual De Operación

DVB-T

Installation

The menu "Installation" includes the searching of the TV or Radio channels and the restoring
of the default settings.
Auto Scan
The Auto Scan Menu is shown in picture. First,
select a country using LEFT or RIGHT. Then
press DOWN to highlight "Select Scan" and
press ENTER. A message will appear, asking if
the results are to be saved. If not, the scan will
begin. If yes, another message, as shown in
picture , will appear, asking if the results will
replace the existing results, or be added to the
existing results. After choosing "Yes" or "No", the
scan will begin.
Manual Scan
The Manual Scan Menu is shown in Picture . A
scan can be performed by setting the following
items: Country, Scan Type, Start Channel, Start
Frequency, End Frequency, and Bandwidth.
If the scan type is a single channel, then only the
country and start channel can be set. If the scan
type is a channel range, then the country, start
channel, and end channel can be set. Use the
UP, DOWN keys to select an item and the LEFT,
RIGHT keys to change the settings. Once done,
go to "Start Scan" and press ENTER.
Default Setup
A message box will appear, asking if the user
wants to reset the system to factory settings.
After the settings are reset, the First Time Instal-
lation message appears
46