Screen Menu - Swann DVR4-5000 Instrucciones De Operación

Record Menu (cont)
Record Quality: Set the image quality of the recordings from Normal, High or
Highest. Note: higher image quality settings use more hard drive space is taken
up by recordings.
Record Schedule: Set different recording modes depending on the time of day.
The Record Schedule allows you to set the recording mode for each hour of the day
based on a 24 hour clock. Use the Channel buttons to change the schedule, or use
the mouse.
No Record: Will not record at all, unless manual recording is engaged by pressing
the REC button.
Time Record: Will record everything in the time specified.
Motion Record: will only record when motion is detected, using your motion
detection settings.
Important: To enable Motion Recording you must set the hour to Motion
Record (green) AND set the Sensitivity and Motion Area in the Motion
Detection menu.

Screen Menu

Border: Applies a border between the cameras in multi camera view.
Video Adjustment: Adjust the display to fit on your TV monitor.
Auto Switching: When active, in live view mode, the DVR will automatically
switch between camera channels in full screen mode. Set the delay from 1-10
seconds between changes or Off.
12 12
The Screen menu adjusts the display of
cameras in the main camera view.