3Com FEM656 C Guia De Inicio Rapido página 12

Connecting the Card
Figure 3 shows how to connect to the network.
I
Figure 4 shows how to connect to a telephone line.
I
Figure 5 shows how to connect to the network and a telephone line
I
simultaneously.
In some countries, you need a telephone line adapter to make the wall jack
accept an RJ-11 connector. To add a telephone set to the modem setup,
a duplex-style adapter may also be required. For information on adapters
for other countries, refer to the user guide.
Installing 3Com Utilities and Documentation
1 Insert the Installation CD in the CD-ROM drive and wait for the
auto-start feature to start the installation.
2 From the 3Com PC Card Installer menu, select the function you want to
perform—typically, User Guides and Mobile Software.
3 Check with your MIS manager about whether to install other utilities
included with the LAN+Modem card.
Viewing or Installing the User Guide
1 Insert the Installation CD in the CD-ROM drive and wait for the
auto-start feature to start the installation.
2 From the 3Com PC Card Installer menu, select User Guides.
3 Select the document you want to view or install the user guide on
your system.
Modem Setup
Data or fax communications software packages must be set up correctly for
your modem to work properly. Follow the setup instructions supplied with
your software. Most applications use the factory-default setting for the
modem initialisation string. To change the default settings, use AT
commands and S-Register settings (see the User Guide for instructions about
using AT commands and S-Registers and the files AtCommandRef.htm and
SRegisterRef.htm on the Installation CD for a list of the commands).
– 7 –
English