(depending on the the room temperature as well as quantity and consistency of the depilatory
product)
3. Adjust the temperature to the setting recommended for the depilatory product e.g.
Next Generation Wax: setting 4 – 5
Adore Strip Wax: approx. setting 5
PINK Sugar Paste: setting 3 – 4
Please note: The settings and times given are approximate values for around 200 g of product (heater
approx. half-full) and without the aluminium bucket. These values may vary depending on the room
temperature, the consistency of the depilatory product, and the fullness of the container. Before ap-
plying the depilatory product to the customer, we recommend that you test the product on the side of
your wrist to ensure that it is at a safe and comfortable temperature.
CLEANING
After use, clean the heating appliance with a special cleaner/wax remover e.g. PINK Wax Solvent. Wax
residues are easy to remove from the surface of the heater while the appliance is still warm. Make
sure you have unplugged the appliance before cleaning. PLEASE NOTE: Use only cleaning products
designed to remove wax.
TECHNICAL SPECIFICATIONS
220 – 240 V, 50 Hz
•
200 watt
•
Maximum temperature: 105 °C
•
Aluminium tank
•
ABS plastic housing
•
Capacity: 800 ml
•
This heating appliance conforms to the following directives:
•
Low voltage directive 2014/35/EU (formerly 2006/95/EEC)
o
Directive on electromagnetic compatibility 2014/30/EU (formerly 2004/108/EEC)
o
The appliance is CE certified and bears the CE mark
•
The symbol
indicates that disposal of this device must be in accordance with the local regula-
•
tions
WARRANTY
The manufacturer's warranty is valid for 12 months from the date of purchase under the following
conditions:
A dated sales receipt and contact details must be provided for any repair covered by the warranty
•
Damage due to the following is not covered by the warranty:
•
Plugging the appliance into the wrong electricity voltage or the wrong type of current
o
Dropping the appliance, negligence, disassembly, improper use (see also the section entitled
o
"Safety guidelines")
Repairs or alterations carried out by a non-certified electrical company
o
If the serial number is damaged, altered, or removed, all warranties are invalid
•
The warranty does not cover normal wear and tear
•
COMPLAINTS
6