Saitek PRO FLIGHT CESSNA YOKE SYSTEM Manual Del Usario página 6

want to mount the Quadrant – either in front of your table surface or on top of it.
Please note that whichever way you choose to mount
the Quadrant, ensure that as you look at the unit the
rocker switches are at the bottom.
Now tighten the Throttle unit clamp's screw
mechanism until it is firmly attached to your table.
You can also position the Throttle Quadrant on the
left or right side of the Flight Yoke.
Now connect the Throttle Quadrant to the Flight Yoke
with the provided PS/2 connector. Your Throttle
Quadrant comes supplied with additional lever knobs
to configure any combination of throttle, flaps, mixture
or prop pitch and you can also buy additional Quadrants to link together for more
complex multi-engine aeroplane configurations.
Use the integrated USB Hub on the side of the Pro Flight Yoke to easily connect other
controllers from the Saitek Pro Flight range, such as additional Pro Flight Throttle
Quadrants, Pro Flight Yoke or other peripherals.
drIvErS aNd SoFtwarE INStaLLatIoN For uSErS oF wINdowS® xp, 32- aNd 64-bIt
1. With your computer powered on, close down any programs that are currently
running, and then insert the Installation CD into your CD-ROM drive.
2. When the Welcome screen appears, click Next to continue. If the CD does not run
automatically, select Start from the Windows Taskbar, then Run, then type D:\Setup.
exe into the Run window's text entry field, and then click OK (assuming D:\ is the
letter of your CD-ROM drive).
3. After reading the Disclaimer, select the I accept the terms of the Disclaimer option
and click Next to continue.
6