Selecting And Attaching Applicators - Textron Greenlee ULTRA GLIDER UG5 Serie Manual De Instrucciones

Setup (cont'd)

Selecting and Attaching Applicators

Applicators are available in two styles—threaded and
slip-in.
• Threaded applicators can be used on any conduit that
has threaded ends. They are available in conduit sizes
from 3/4" to 4".
• Slip-in applicators can be used on any conduit where
the feed direction is horizontal or downward and
where a slight reduction of the conduit fill area is
permissible. They are available in conduit sizes from
1-1/2" to 6". Slip-in applicators are stepped to fit both
schedule 40 and 80 conduit.
To attach an applicator:
1. Select the appropriate applicator for the application.
2. Remove one of the pins and open the applicator.
Note: If feeding upward into EMT conduit, fit a
threaded EMT adapter (if one is not already fitted)
onto the conduit, and attach a threaded applicator
to the adapter.
Confirm that the cable grip will pass through the
applicator. If it will not, feed the nose of the cable
into the conduit before attaching the applicator.
Greenlee / A Textron Company
UG5 Cable Lubrication System
3. For threaded applicators, attach the applicator to
the threads of the conduit so that the quick connect
nipple is accessible. Close the applicator and re-
insert the pin. Screw the conduit bushing onto the
male threads of the applicator.
Quick
Connect
For slip-in applicators, place the applicator around
the pull rope. Close the applicator and re-insert the
pin. Fully insert the applicator into the conduit.
Quick
Connect
4. Attach the hose to the quick connect nipple on the
applicator.
6
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070