Hardware Installation - unotec CAUTIUM III Manual Del Usuario

quicK installation Manual
This is new generation of P2P IP camera which adapts a groundbreaking P2P tech-
nology. The easy-setup, high quality camera delivers crystal clear surveillance video
to your smart phone or PC. You can remotely control it from anywhere, anytime, and
receive push notification message to your smart phone or email address when motion
alarm is detected.

1.Hardware installation

1) Connect the IP Camera to the power supply and router. Check if the Power indica-
tor (Yellow) and Network indicator(Green) are on.
[Pic 1]
Power Light: always on when the power on
I / O interface: connect infrared sensors /alarm etc.
Network light: always flash when data transfers.
Power supply: connect DC 5V power
Network Cable interface: Connect the router / switch.
SD card slot: insert SD memory card.
WIFI antenna: receive wireless signal.
Audio Output: connect external speaker.
2.router connection diagraM
[Pic 2]
Note: Use the matched power adapters of the camera to avoid damage to the
camera.
Tip: If you need to restore the factory settings, find the reset button at the bottom of
the camera, hold 10 seconds when the power is on. Or restore it via software.
3.View Via android Mobile pHone.
a. You can download the App from Google play. To find it search "IPCAMERAHBP" to
download and install it.
b..Find the CD-ROM from the box and open the Android mobile client, the file name
is : " IPCamHbp.apk "
[Pic 3, 4]
Way 1:
search and add cameras within the same LAN. If the cameras and phones are not in
the same LAN, then cameras won't appear.
[Pic 5]
Way 2: Input the UID on the "UID" of the APP. The default user name and
password are: admin. After login, the APP will ask you to modify the password. Note:-
the "Device ID"is on the bottom of the ip cameras.
Click Search within the same LAN network cameras. Users can
englisH