Live View - Brinno PHV MAC Manual De Instrucciones

Installation
5. Remove PE film over the camera lens on the
back.
6. Place the PHV MAC on the flange on a slight
counter clock wise angle and rotate the PHV
MAC clockwise until horizontal and you feel it
lock in place.
7. Insert the Micro SD Card in the slot as
shown.
Use the screwdriver to tighten the Locking
Screw, if necessary.
You are now ready to turn on the Motion
Activated PeepHole Camera!

Live View

1. Press the Power button.
2. The LCD Panel Screen will display who is at the door
3. After 10 seconds, the screen will shut off to save the power.
4. To Zoom in on the person at the door, press the Power button again.
You can toggle in and out of zoom mode with the Power button.
During the Live View, the PHV MAC is still recording.
5
6
7
PHV MAC- EN
09