Removing Icsa From Stroller; Removing Restraint Belt From Stroller - B.O.B Duallie Guia Del Usuario

BOB Gear by Britax
NOTE: We do not recommend
leaving the stroller folded with the
ICSA installed for long periods of
time as it may leave an imprint
in the stroller seat. For long term
folded storage, remove the ICSA.
Removing ICSA from
Stroller
1� Prepare stroller
Set parking brake, rotate canopy
towards handlebar (see stroller
user guide if necessary).
2� Remove ICSA from receivers
Slide the release button guard on
snack tray side of ICSA forward
and press the stroller release
buttons, then pull ICSA forward
and out of receiver sockets,
keeping alignment even, left to
right, as you pull�
10
NOTE: For strollers manufactured
prior to September 2015, slide the
covers at the front of the stroller
accessory adapters up to cover
the receiver sockets.
Removing Restraint
Belt from Stroller
1� Unscrew captured screws
Using a screwdriver, unscrew
each captured screw from each
respective stroller anchor nut.
2� Keep restraint belt
Keep restraint belt together with
ICSA for next use.