Cleaning the Refrigerator
NOTE: Do not use abrasive or harsh cleaners such as window
sprays, scouring cleansers, flammable fluids, muriatic acid,
cleaning waxes, concentrated detergents, bleaches, or cleansers
containing petroleum products on exterior surfaces (doors and
cabinet), plastic parts, interior and door liners, or gaskets� Do not
use paper towels, scouring pads, or other harsh cleaning tools�
1.
Unplug refrigerator or disconnect power�
2.
Hand wash, rinse, and dry removable parts and interior
surfaces thoroughly� Use a clean sponge or soft cloth
and a mild detergent in warm water�
3.
Clean the exterior surfaces�
Painted metal: Wash painted metal exteriors with a clean,
soft cloth or sponge and a mild detergent in warm water�
Rinse surfaces with clean, warm water and dry immediately
to avoid water spots�
Stainless steel: Wash stainless steel surfaces with a clean,
soft cloth or sponge and a mild detergent in warm water�
Rinse surfaces with clean, warm water and dry immediately
to avoid water spots�
NOTE: When cleaning stainless steel, always wipe in the
direction of the grain to avoid cross-grain scratching�
4.
There is no need for routine condenser cleaning in normal
home operating environments� If the environment is
particularly greasy or dusty, or there is significant pet
traffic in the home, the condenser should be cleaned
every 2 to 3 months to ensure maximum efficiency� If you
need to clean the condenser, use a vacuum cleaner.
5.
Plug in refrigerator or reconnect power�
Defrosting
NO-FROST REFRIGERATOR COMPARTMENT:
Refrigerator compartment defrosting is completely automatic�
The defrost water is automatically run into a drain hole hidden
behind Multi-flow and collected in a container, where it
evaporates�
NO-FROST FREEZER COMPARTMENT:
No-frost freezers provide chilled air circulation around the storage
areas and prevent the formation of ice, thereby completely
eliminating the need for defrosting� Frozen items
don't stick to the walls, labeling stays legible, and storage
space remains neat and clear�
The light system inside the fridge compartment uses LEDs
light, allowing for better lighting as well as very low energy
consumption� If the LED light system does not work, please
contact an authorized service provider to replace it�
Important: The refrigerator compartment light switches on when
the refrigerator door is opened� If the door is kept open for more
than 4 minutes, the light will be automatically switched off�
Vacation and Moving Care
Vacation
If You Choose to Leave the Refrigerator
On While You're Away:
Use up or freeze perishable food�
If You Choose to Turn Off the Refrigerator
Before You Leave:
1.
Remove all food from the refrigerator�
2.
Tape rubber or wood blocks to the tops of both doors to
prop them open far enough for air to get in� This stops odor
and mold from building up�
Moving
1.
Take out all removable parts, wrap them well, and tape
them together so they don't shift and rattle during the move�
2.
Unplug refrigerator�
3.
Raise the leveling screws so they don't scrape the floor�
4.
Tape the doors closed and tape the power cord to the back
of the refrigerator�
When you get to your new home, put everything back and refer to
the "Installation Instructions" section for preparation instructions.
Lights
15