Controls
OSD MENU
MENU
8. MOIRE
Odd press
: Selects and blinks the function. Please control these key
MOIRE CONTROL
function with RED ICON in order the image not to shiver.
H. MOIRE ADJUST
Even press
V. MOIRE ADJUST
: Stops blinking and
50
ready to move function
you want.
9. LANGUAGE
Selects the languages
with RED ICON and
LANGUAGE
Exit to No.2
ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL
PORTUGUÊS
PRESS MENU KEY
10. OSD POSITION
Toggles OSD position
horizontally or vertically. menu left or
OSD H.POSITION
50
11. COLOR MODE
Odd press
: Blinks the RED ICON
COLOR - TEMP
- color menu ICON.
Even press
: Stops blinking and
USER
6500K
9300K
ready to move function
you want.
When the color mode
ICON is blinking in user
mode, press, then go to
color adjust mode
No.12.
12. COLOR ADJUST
Odd press
MODE
: Selects and blinks the you want.
function you want.
RB
GB
BB
RG
GG BG
USER
50
Even press
RB - Red background raster
: Stops blinking and
GB - Green background raster
ready to move function
BB - Blue background raster
RG - Red level gain
you want.
GG - Green level gain
BG - Blue level gain
10
User's Manual
+
Contros the amount of selected Exit to No.2
Moves to function you want.
Moves to language you want.
Exit to No.2
Moves the OSD Moves the OSD Exit to No.2
menu right or
down in the
up in the
selected
selected
function.
function.
Moves to color mode you want
Exit to No.1
and the selected "color mode"
will blink.
Moves to function you want.
Exit to No.1
_
_
_
Controls the amount of function
Exit to No.11
Moves to the function you want. Exit to No.11
OSD MENU
MENU
13. ZOOM
Odd press
: Selects zoom and
ZOOM
blinks the zoom ICON.
50
Even press
: Stops blinking and
ready to move anther
function.
Recall (
)
: Recall control to the factory setting resets all the controls within the all menu.
If you want to return to the factory mode setting, press Recall key 5~8 Sec
continuously.
Degauss (
) : Eliminates the build-up of stray magnetic fields which alter the correct scan of the
electron beams and affect the purity of the screen colors, focus, and
convergence. When pressed, you screen image will jump and waver a bit as the
screen is demagnetized.
Caution
: Please allow aminimum of 20 minutes to elapse between uses of the Degauss
button. Do not hold the button down continuously to avoid decreasing the life the
Deguass circuitry.
Geometry Controls Menu
GEOMETRY
The Geometry controls allow you to adjust the curvature or angle
PINCUSHION
PARALLELOGRAM
of the sides of you display.
TRAPEZOID
PINBALANCE
ROTATION
50%
50
Pincushion
: Increases or decreases the curvature of the sides either inward or outward.
Parallelogram : Increases or decreases the tilt of the sides either to the left or right.
Trapezoid
: Increases or decreases the bottom of the screen to be the same as the top.
Pin Balance
: Increases or decreases the curvature of the sides either to the left or right.
Rotation
: Increases or decreases the tilt of the screen image relative to a horizontal line.
Controls
+
Shinks the
Expands the
Exit to No.1
image
image
horizontally
horizontally
and vertically.
and vertically.
Moves to the function you want. Exit to No.1
User's Manual
11