Idiomas disponibles
Idiomas disponibles
ART. 12/23014-00
INSTRUCTION MANUAL FOR MOUNTING THE WALL SUPPORT FOR LED TV / LCD / PLASMA
2. List of pieces supplied:
Please check the parts in the package compare with the following list. Make sure all of the parts are in the package.
Never use defective parts. Never replace part with different specification.
Note: Incorrect installation may cause injury!
(A)ST6.3*65 screws(3) (B)Ø10*61 Plastic anchors(3) (C)Ø4 Flat washer(4) (D)Ø5 Flat washer(4) (E)Ø6*Ø16*1.5 Flat washer(7) (F)M4*8 Screw(4)
(G)M4*12 Screw(4)
(M)M8*12 Screw(4)
3. Installation and operating instructions
Note: Please read these instructions carefully before installation!
Step 1
Loosen the two bolts on the TVplate as shown in the fig, thenlift and remove the TV plate from the wall plate.
Step 2
Put the level bubble on the top eage of the wall plate.
ELCART DISTRIBUTION SPA via Michelangelo Buonarroti, 46 - 20093 Cologno Monzese (Milano) ITALY
Tel. +39 02.25117310 Fax +39 02.25117610 sito internet: www.elcart.com e-mail: [email protected]
La divulgazione dei dati contenuti in questa scheda è da ritenersi un servizio puramente informativo e non costituisce alcun vincolo da parte della Elcart in merito a prestazioni ed utilizzo del prodotto.
The divulgation of data contained on this technical sheet are exclusively for informational reasons and establish no link on behalf of Elcart regard to the performances and the use of the product.
La divulgacion de los datos contenidos en esta ficha son un servicio unicamente informativo y no constituyen ningun vinculo de parte de Elcart respecto a las prestaciones y uso del producto.
ELCART
Manuale di istruzioni/Scheda tecnica
ART. 12/23014-00 Color: BLACK
1. Technical parameter:
Maximum load: 25kg
Swing angle: ±90°
Pitching angle: +5°~-15°
Rotate angle: ±20°
Distance from wall: 52~300mm
Vesa: 75-100-200
(I)M5*12 Screw(4)
(H)M5*8 Screw(8)
(N)Spanner S=13(1)
Plastic cover(1)
Bolts
(J)M6*8 Screw(4)
(K)M6*12 Screw(4)
Level bubble(1)
Plastic cover(1)
TV plate
Step 3
Use the wall plate as a templet to drill three holes of Ø 8mm and 50mm depth
in the vertical wall.Then wedge three plastic concrete anchors into the holes.
Fix the wall plate with three lag bolts through the mounting holes to install the wall
plate on the vertical wall firmly.
PAGINA 3 DI 6
(L)M8*8 Screw(4)
Extensions(4)
B
E
A
