Beninca BE-REC Manual Del Usuario página 5

Programmable two-channel receiver, to be combined with one or more "BE/PLAY" keypads.
BE/REC Receiver Technical Characteristics
Power supply
Outputs
No. connectable keypads
Maximum distance between
BE/PLAY-BE/REC devices
Storable codes
Degree of protection
Working temperature
Number of leads
Keys
Signals
Degree of
protection
Working
temperature
1-2 Channel 1* output (500mA-48Vac/dc max)
3-4 Channel 2* output (500mA-48Vac/dc max)
5-6 Power supply input 24 Vac/Vdc (5-,6+)
7-8 Serial input for receiving code from the keypad(s) (7-,8+)
*In the factory configuration the outputs 1-2 present a normally open contact (N.O.). This may be changed
to a normally closed contact (N.C.) by following the indications given in the paragraph "Changing the
output contact NO<>NC".
1-2 Serial output for transmitting code (1-,2+)
There are two possible operating
Functions in BASIC mode:
- Inserting the code
- Erasing the code
- Completely erasing the memory
Functions in ADVANCED mode:
- Inserting the code
- Inserting countdown codes: the code is allowed only a determined number of accesses (from 1 to
999)
- Erasing the code
- Disabling codes with a determined first figure
BE/REC Receiver
24 Vac/Vdc
2 channels max load 500mA-48Vac/dc.
4 BE/PLAY keypads connectable to each receiver
40m using screened cable
Up to 250 codes. Each code may be composed of a maximum of 9
figures
IP30
from -20°C to +70°C
BE/PLAY Keypad Technical Characteristics
2
10 numerical keys 0-9 plus 1 activation key
Rear-lit keypad for night use and acoustic warning
buzzer which may be disabled.
IP54
from -20°C to +70°C
BE/REC Receiver Inputs/Outputs functions
BE/PLAY Keypad Inputs/Outputs functions
RECEIVER CONFIGURATION
modes: Basic and Advanced.
�
� �
� �
� �
� �
�
5