Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3.
Drill four pilot holes using a 7/32 in. (5.5 mm) diameter drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 2 3/4 in. (69.8 mm). Be sure to drill into the center of the studs.
4.
Install wall plate
using four lag bolts
14
CAUTION:
Avoid potential personal injury or property damage! All four lag bolts
movement of the wall plate
14
Go to STEP 3 on PAGE 12.
3
and four washers
15
. Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
2 3/4 in. (69.8 mm)
7/32 in.
(5.5 mm)
. Tighten the lag bolts only until they are pulled firmly against the wall plate.
16
MUST BE firmly tightened to prevent unwanted
15
4
14
16
15
9
Tabla de contenido
