Nassar IS-6 Manual De Instrucciones página 7

Recomendations
To prevent damage to the pressure switch by liquid
hammering, its recommended that the tube or pipe that
supplies the pressure to the switch has at least 3 or 4 loops
before the connection.
Thread type
Thread type : 1/4 Flare
B: 7/16 in
E: 0.172 in
Threads per Inch: 20
Specifications
PRESIÓN DE AJUSTE
CONTACT
CONTACT RATING
DIMENSIONS
OPERATING TEMPERATURE
WEIGHT
WARRANTY
WARRANTY
These products are warranted to be free from defects in workmanship or material under normal service and use for a period of three (3) years from date
of manufacture. Nassar Electronics shall, at its option, repair or replace F.O.B. point of manufacture the portion of the product found by Nassar
Electronics to be defective. All replacements or repairs necessitated by inadequate maintenance, normal wear and usage, unsuitable power sources or
environmental conditions, accident, misuse, improper installation, modification, repair, use of unauthorized replacement parts, storage or handling, or
any other cause not the fault of Nassar Electronics are not covered by this limited warranty, and shall be at the buyer's expense. All costs of dismantling,
reinstallation and freight, and the time and expenses shall be borne by the buyer.
LIMITATION OF REMEDY AND LIABILITY
NASSAR ELECTRONICS SHALL NOT BE LIABLE FOR DAMAGES CAUSED BY DELAY IN PERFORMANCE. THE REMEDIES OF THE BUYER SET FORTH IN THIS
AGREEMENT ARE EXCLUSIVE. IN NO EVENT, REGARDLESS OF THE FORM OF THE CLAIM OR CAUSE OF ACTION (WHETHER BASED IN CONTRACT,
INFRINGEMENT, NEGLIGENCE, STRICT LIABILITY, OTHER TORT OR OTHERWISE), SHALL NASSAR ELECTRONIC'S LIABILITY TO THE BUYER AND/OR ITS
CUSTOMERS EXCEED THE PRICE TO THE BUYER OF THE SPECIFIC GOODS MANUFACTURED OR SERVICES PROVIDED BY NASSAR ELECTRONICS GIVING
RISE TO THE CLAIM OR CAUSE OF ACTION. THE BUYER AGREES THAT IN NO EVENT SHALL NASSAR ELECTRONIC'S LIABILITY TO THE BUYER AND/OR ITS
CUSTOMERS EXTEND TO INCLUDE INCIDENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES. THE TERM "CONSEQUENTIAL DAMAGES" SHALL INCLUDE,
BUT NOT BE LIMITED TO, LOSS OF ANTICIPATED PROFITS, REVENUE OR USE AND COSTS INCURRED INCLUDING WITHOUT LIMITATION FOR CAPITAL, FUEL
AND POWER, AND CLAIMS OF THE BUYER'S CUSTOMERS.
INTERRUPTOR DE PRESIÓN/PRESSURE CONTROL SWITCH
IS-10
15-145 PSI (10 kg/cm )
SPDT
FLA: 15A @120VAC, 8A 240 VAC 50/60 Hz.
8.3 x 5.5 x 4.3 in (21 x 11 x 14cm)
-10 a 100 °C (14 a 212°F)
370 gr (13 Oz.)
1 year
System
pressure
2
*Specifications subject to change without notice.
Nassar Electronics
J. M. Salas 124 Pte.
64290 Monterrey, N. L. México
email: [email protected]
Ph.+ 52 (81)-8351-0006
To the
pressure switch
IS-6
2
0-87PSI (6kg/cm )