EN
child sit down in the child seat. Take the Top Tether out
and hang it on fixed points in the vehicle user manual
recommended , please find this on your vehicle or
consulting vehicle retailer look for Mark points
(Fig 6d)
According to the current vehicle, there are three types
of locking Top tether location. For reference, only. (FIG
6e)
Tighten the Top Tether adjust strap until the green is
displayed as a Lock set status.
NOTE:
• If it is shown was red, continue to pull If it is shown
was red, continue to pull.
Press the isofix adjust button down "a" , Also, "b" press
the arrow direction can adjust the length of the Isofix
connector, both sides Isofix connector the length
adjustment is the same. (FIG.6g)
Fasten the connector points into the Isofix points of the
car to secure the installation. (FIG. 6h)
Put the Car Seat on the vehicle seat, align it with the
40
ISOFIX interface in the vehicle seat and push forward.
IM 2086.00 ALL ABOARD bo.indd 40
"Click" will be heard when the FIX Conne -ctors are
locked. (FIG.6i)
NOTE:
• Same time please also check the red and green sign
show green.
If in doubt, please consult either the child restraint
manufacturer or retailer.
Front view of the belt routing (Fig 6j)
Please refer to 3a - 3f, laying your baby in carseat
correctly. (FIG 6j)
7
Forward facing (9-18kg Child) : ISOFIX+Top
tether;
Car seat is adjusted to Position 1. or 2. 3, Have your child
sit down in the child seat.
Seat your child in the carseat, and child's back,
shoulders and haunch lean to carseat. Pull out the
harness, Make sure the belt is worn through under the
armrest of the car seat, the shoulder strap across the
handrail above.
8/1/19 11:18