Filling The Water Tank - Air innovations Clean Mist Manual De Instrucciones E Información Sobre La Garantia

Filling The Water Tank

WARNING: Always unplug the unit before removing the Water Tank.
WARNING: DO NOT touch the water in the Base.
WARNING: NEVER fill the Water Tank from the top of the unit. Follow Water Tank
filling instructions in #4.
1
Remove Rotating Mist Nozzle
prior to filling the Water Tank.
4
Filling the Water Tank: Use clean,
WARNING: DO
cool, tap water.
NOT use extremely cold water, since
it may temporarily reduce the mist
WARNING: NEVER fill
output.
with hot/warm water or use additives
as this could damage the unit and void
.
WARNING: If you
the warranty
have hard tap water STOP using tap
water and use ONLY filtered, distilled,
cold boiled or bottled water.
7
4
2
Lift the Water Tank with both
hands using the Handle to remove
the humidifier from the Base.
5
Replace the Tank Cap by firmly
turning clockwise until tight.
Turn the Water Tank upright and
check the Tank Cap for leaks.
If any water drips, remove the
Tank Cap and retighten.
WARNING: DO NOT place
Water Tank on the humidifier
Base if the cap is leaking.
Attach the Rotating Mist Nozzle
to the top of the Water Tank by
snapping into place for desired
use as pictured.
3
Turn the Water Tank upside down
and remove the Tank Cap
by turning it counter clockwise.
6
Lift the Water Tank with both
hands using the Handle and
replace on the humidifier Base.
Make sure to follow the shape of
the Water Tank and the humidifier
Base, so that the tank sits level
and flush to the Base. Ensure
the tank is firmly seated.