Symbol Description - pico Technology PicoConnect 442 Guia Del Usuario

PicoConnect 442 Differential Probe User's Guide
2. Safety
2.1 General
To prevent possible electrical shock, fire, personal injury, or damage to the product,
carefully read this safety information before attempting to use the product. In
addition, follow all generally accepted safety practices and procedures for working
with and around electricity.
The PicoConnect 442 probe is designed and tested to EN 61010-1:2010 General
requirements and to EN 61010-2-030:2010 Particular requirements for testing
and measuring circuits. The TA089 and TA090 sprung hooks are designed to
EN 61010-031:2015 Safety requirements for hand-held probe assemblies.
The following safety descriptions are found throughout this guide:
A WARNING identifies conditions or practices that could result in injury or death.
A CAUTION identifies conditions or practices that could result in damage to the
product or equipment to which it is connected.
WARNING
To prevent injury or death use the product only as instructed as an accessory
for the PicoScope 4444 differential oscilloscope and use only the supplied
or recommended 1000 V CAT III rated accessories. Protection provided
by the product may be impaired if used in a manner not specified by the
manufacturer.
2.2 Symbols
These safety and electrical symbols may appear on the product or in this guide.
Symbol Description
Earth (ground) terminal
Possibility of electric shock
Caution
IEC 61010 overvoltage
category
Do not dispose of this product
as unsorted municipal waste
2 Copyright © 2017 Pico Technology Ltd. All rights reserved.
Terminal can be used to make a
measurement ground connection. The
terminal is NOT a safety or protective
earth.
Appearance on the product indicates a
need to read these safety and operation
instructions
DO283-2