Taurus Alpatec TORONTO P Manual De Instrucciones página 12

- Do not use the appliance to dry textiles of any
kind.
- CAUTION: User can't sleep when appliance is
under use; there is a risk of injuries.
SERVICE:
- Make sure that the appliance is serviced only
by specialist personnel, and that only original
spare parts or accessories are used to replace
existing parts/accessories.
-
ance's cleaning is not done according to these
instructions.
- Any misuse or failure to follow the instructions
for use renders the guarantee and the manufac-
turer's liability null and void.
DESCRIPTION
A Air outlet
B On/Of switch
C Control panel
D Top wall bracket
E L-shape
F Plastic expansion screw
G Wall screws
CONTROL PANEL
a On/off button
b + button
c - button
d Low/high heating power button
e Clock button
REMOTE CONTROL
I On/off button
II Low/high heating power button
III + button
V Days button
VI - button
VII Hours button
VIII Weekly program button
IX Set up button
X Minutes button
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
INSTALLATION:
-
terial such as textiles, cardboard or paper, etc.
- Install the appliance a minimum distance of
50cm away from combustible materials, such as
curtains, furniture ...
- Ensure that neither the air access nor exit
become either totally or partially covered by
drapery, clothing, etc., as this increases the risk
- The appliance requires suitable ventilation in
order to work properly. Leave a space of 30 cm
between walls or other obstacles and 60 cm
-
- Do not cover or obstruct any of the openings of
the appliance.
- The plug must be easily accessible so it can be
disconnected in an emergency.
-
appliance it should be situated in a place where
the atmospheric temperature is between 12 and
32ºC.
-
pliance and so as to be able to install the appli-
ance on a cold wall (an exterior wall) and below
a window. But never obstructing or covering a
ventilation area.
- The appliance should work well with its wall
support attached or with its base/feet attached.
- The appliance has a wall bracket (D) which
- Ensure that the appliance is properly and safely
avoid damaging the appliance, on recommend
manufacturer.
ASSEMBLING THE WALL BRACKET:
- The appliance has a wall bracket (D) on which it
can be supported.
- Taking into account the separation distances
mentioned above, place the wall support in the
required position and mark the drilling points on
the wall. (Fig.1).
- Drill into the wall where marked and insert the
rawlplugs. (Fig.1).
- Place the wall support (D) by matching the
(Fig.1).
-
should be able to support twice the weight of the
appliance.
- Screw the L-shape (E) onto the appliance using
the screws (H).
- Fit the appliance into the wall bracket (D) and
-
screw L-shape to the wall.
-