nedis BTTC100BK Guia De Inicio Rapido página 7

Receiver mode (image B)
1. Set the mode switch A
2. Plug the 3.5 mm to 3.5 mm audio cable A
5
input A
3. Plug the other end of A
4
It is also possible to connect headphones directly to A
4
You can also connect an audio device with the 3.5 mm female to
2 x RCA cable A
4. Switch on the product.
2
A
flashes quickly.
5. Enable Bluetooth on the device you want to pair.
6. Select "BTTC100BK" from the list of available Bluetooth devices
on your device.
2
A
flashes slowly to indicate pairing is successful.
4
7. Press A
Transmitter mode (image C)
1
1. Set A
to TX.
8
2. Plug A
3. Plug the other end of A
4
You can also connect an audio device with the 3.5 mm female to
2 x RCA cable A
4. Switch on the product.
2
A
flashes quickly.
5. Keep your Bluetooth audio device within range and switched on.
4
Pairing time will vary depending on the device used.
5
A
flashes slowly to indicate pairing is successful.
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product BTTC100BK
from our brand Nedis
to all relevant CE standards and regulations and that all tests have
been passed successfully. This includes, but is not limited to the RED
2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if
applicable) can be found and downloaded via:
webshop.nedis.com/BTTC100BK#support
For additional information regarding the compliance, contact the
customer service:
Web: www.nedis.com
E-mail: [email protected]
Nedis B.V., de Tweeling 28
5215 MC 's-Hertogenbosch, the Netherlands
1
.
8
7
.
to play or pause music.
5
into A
.
8
7
.
, produced in China, has been tested according
®
to RX.
into the audio device.
into your audio source.
7
8
into the aux output/
5
.