HIKVISION DS-K1T803F Manual De Usuario página 167

the decimal digit is 10. It represents that from bit 0, there are 32 bits represent the card ID. (The length here is calculated
by bit.) And the decimal digit length is 10 bits.
Site Code Start Bit, Length, and Decimal Digit: If you use the transformation rule, these items are available. For detailed Site Code Start Bit, Length, and Decimal Digit: If you use the transformation rule, these items are available. For detailed
information, see the explanation of the card ID.
OEM Start Bit, Length, and Decimal Digit: If you use the transformation rule, these items are available. For detailed OEM Start Bit, Length, and Decimal Digit: If you use the transformation rule, these items are available. For detailed
information, see the explanation of the card ID.
Manufacturer Code Start Bit, Length, and Decimal Digit: If you use the transformation rule, these items are available. Manufacturer Code Start Bit, Length, and Decimal Digit: If you use the transformation rule, these items are available.
Depending on the table displayed above, the manufacturer code start bit is 32, length is 8, and decimal digit is 3. It
represents that from bit 32, there are 8 bits are manufacturer code. (The length here is calculated by bit.) And the decimal
length is 3.
Fingerprint Access Control Terminal · User Manual Fingerprint Access Control Terminal · User Manual Fingerprint Access Control Terminal · User Manual
156
0101001070823