Tabla de contenido
Idiomas disponibles
Idiomas disponibles
FIGURE 2
15
2
25
#10 BOLT M6*25
Step 2:
Fasten the bottom frame (#4) and the cross brace (#15)
to frames (#2 and #3) by using bolts (#10) and screws
(#16). See Figure 2.
FIGURE 4
Step 4:
Insert the upper connectors (#8) into the holes in the
front door (#5). Fasten the upper connector (#8) to the
frame 1 (#3) by using bolt (#11).
See Figure 4.
Note:
1) Close the front door to
ensure proper assembly.
See Illustration A.
2) When moving the appliance,
make sure that the front door
is closed.
3) Pull and slide the fastener
out when you open the door.
V-3
3
4
10
10
11
#11 BOLT M6*15
DO NOT RETURN TO THE STORE!
STOP
FIGURE 3
16
#11 BOLT M6*15
Step 3:
Fasten the lower connector (#7) to the corner of the
bottom rim of the frame 1 (#3) by using bolt (#11).
Then, insert the front door (#5) into the connector tab
on the lower connector (#7). See Figure 3.
Note:
The lower connector (#7) is marked with an "E".
FIGURE 5
6
15
Igniter
Valve
Step 5:
A
Place the table top (#6) onto the frame assembly.
Fasten them together by using bolts (#11). Make sure
that all of the bolts have been tightened completely.
See Figure 5.
Note:
The igniter valve should be facing towards the front
left side of the appliance.
PAGE 4 OF 8
3
11
15
#11 BOLT M6*15
7
E
3
5
11
15
Tabla de contenido
