Safety Instructions - Victron energy IMPULSE-II 24/6 Manual

2. SPECIFICATIONS
Primary voltage
Secondary nominal voltage
Charge voltage 'absorption'
Charge voltage 'float'
Charge voltage 'storage'
Maximum charge current
Battery type
Recommended battery capacity :
IMPULSE-II 24/6 40Ah
IMPULSE-II 24/8 60Ah
Protection
Input power
Efficiency
Ambient temperature
Protection class
Dimensions (hxwxd)
Safety class
Weight
Storage temperature
Humidity

3. SAFETY INSTRUCTIONS

• Always provide proper ventilation during charging.
• Avoid covering the charger.
• Never try to charge non-rechargeable - or frozen batteries.
• Never place the charger on top of the battery when charging.
• Prevent sparks close to the battery. A battery being charged could emit explosive
gasses.
• Battery acid is corrosive. Rinse immediately with water if acid comes into contact with
skin.
• This appliance is not designed for use by young children or people who cannot read or
understand the manual unless they are under the supervision of a responsible person to
ensure that they can use the battery charger safely. Store and use the battery charger
out of the reach of children, and ensure that children cannot play with the charger.
• Connection to the mains supply must be in accordance with the national regulations for
electrical installations. In case of a damaged supply cord please contact the manufacturer
or your service agent.
4
: 230Vac - 50/60Hz - 1-phase
: 24V
: 28,8V
: 27,6V
: 26.4V
: IMPULSE-II 24/6: 6A;
: IMPULSE-II 24/8: 8A
: Gel or AGM
Min. Max.
(in order to charge 80% capacity within 8 hours)
60Ah
85Ah
: - output short circuit, over voltage and reversed polarity
- high temperature
: IMPULSE-II 24/6: 180W, IMPULSE-II 24/8: 240W
: min. 90% (at full load)
: -20°C to +40°C
: IP44
: 60 x 105 x 190mm
: II
: 1kg
: -30°C to +50°C
: max. 95% (non-condensing)