Parameters - TECE RDF 6422-00 Serie Manual Del Usuario

Parameters

Parameters
Temperature
for presence in
heating mode
Temperature
for presence in
cooling mode
Setback temperature
for heating mode
Setback temperature
for cooling mode
Floor heating
Minimum tempera-
ture
(only RDF 64212-xx)
(Condition: The
external tempera-
ture sensor must be
parametrized and
installed as floor
sensor)
Symbol Steps
¾ Activate and set the de-
sired temperature.
¾ Confirm by pressing.
¾ Activate and set the de-
sired temperature.
¾ Confirm by pressing.
¾ Activate and set the de-
sired temperature.
¾ Confirm by pressing.
¾ Activate and set the de-
sired temperature.
¾ Confirm by pressing.
¾ Activate and select the
desired comfort tempe-
rature (1.0 ... 6.0 ≈ 18 °C
... 28 °C
¾ Confirm by pressing.
Lights up when the floor
temperature is fallen short
of.
--
= deactivate)
DEU
ENG
FRA
NDL
ITA
ESP
33