SSS Siedle BCMC 650-02 Guia De Incio Rapido página 4

English
Application
Bus camera module 80° for installa-
tion in Siedle Vario 611 housing and
the In-Home bus Siedle intercom
system.
Electrical voltage
Mounting, installation and servicing
work on electrical devices may only
be performed by a suitably qualified
electrician.
In the case of video systems, the fol-
lowing mounting situation must be
avoided at all costs:
• direct ajour light
• direct sunlight
• very bright image backgrounds
• highly reflective walls opposite the
camera
• lamps or direct light sources
Scope of supply
• Camera module BCMC 650-...
• Terminal block
• Allen key size 2.5
• This product information
Mounting
1 Recommended mounting height
appr. 1.60 m to centre camera.
For information on mounting the
camera module, see the "Vario
mounting instructions" enclosed
with mounting frame MR 611-...
2 Note the mounting position of the
camera, the type designation must
be legible at the top back of the
module.
3 Pick-up angle of the camera
with an angle of aperture of 80°.
The angle of vision of the camera
module can be pre-adjusted hori-
zontally and vertically by around 30°
depending on the mounting situ-
ation.
4
4 On the back of the camera,
release the centrally positioned
screw by screwing the Allen key one
turn to the left. Position the camera
eye using the Allen key to the
required viewing direction.
5 Fix the camera eye in the required
position by turning the screw. Do
not fasten the screw too tightly.
Terminal assignment
TaK In-Home bus: Video,
TbK camera branch
Ta Connection of the BTLM/
Tb BTLE door loudspeaker
Vc Actuation from the door
GND loudspeaker to turn the
camera on
b Power supply 12 V AC
c for heating
Pilfer safeguard
In order to protect the Vario modules
from unauthorized access, the pilfer
safeguard controller DSC 602-... can
be optionally used in conjunction
with the ZDS 601-... This can be
used to protect the inserted modules
from unauthorized access.
Installation
Installation and commissioning are
described in the Siedle In-Home-Bus
Video system manual.
Specifications
Colour system: PAL
Image pick-up: CMOS sensor 1/3" –
728 x 488 pixel (horizontal/vertical)
Automatic day/night switchover
Lens: 2.9 mm
Pick-up angle: Horizontal
approx. 80°, vertical approx. 60°
Mechanical adjustment range:
Additionally by another approx. 30°
(horizontal/vertical)
Resolution: Horizontal 520 TV-lines
Infrared lighting: Integrated
2-stage heating: 12 V AC
max. 130 mA
Protection system: IP 54, IK 10
Ambient temperature:
–20 °C to +55 °C
Height of structure (mm): 32
Dimensions (mm) W x H x D:
99 x 99 x 58
BCMC 650-12 USA
Colour system: NTSC
For further technical details, see
above