Festo DPA Serie Instrucciones De Utilizacion página 15

DPA−...
Please comply with national and local safety laws and regulations
S
(e.g. Safety regulations as per EN 1012, part 1).
Use a start−up valve of type
S
DPA−...
The start−up valve must not be opened until the pressure in your system has
built up.
Use a start−up valve of type
S
DPA−...
In this way, the downstream switched system can be exhausted quickly.
Remove the packing with the exception of the adhesive labels on the
S
compressed air connections (to prevent dirt from entering).
It is intended that the packaging be recycled on the basis of its constituent
materials (exception: oiled paper = other waste).
Please observe the warnings and instructions:
S
on the product and
in these operating instructions.
Use the product in its original state. Unauthorised modification is not
S
permitted.
4 Transport and storage
Warning
Work loads which suddenly fall down may
cause injury to people.
S Take the weight of the DPA−... into con
sideration. Depending on the design the
DPA−... can weigh up to 13 kg.
Due to the large mass, the adjusting
knob may become loose.
The adjusting knob must therefore not
be used as a support for transporting the
DPA−...
Festo DPA−... 0510c English
HE−...−D−... or HEE−...−D−...
HE−...−D−... or HEE−...−D−...
Fig. 4
on the input side of the
on the output side of the
15