To check a proper installation, please switch on the engine and wait a few seconds (around 8 – 10 s). The display will switch on showing the working hours and the blinking dot. Hourmeter C1 – User Manual rev. 04 ATHENA EVOLUTION srl Web: www.getdata.it...
Página 3
1: CLEEN PROPERLY THE SURFACES 2: REMOVE PROTECTION FROM C1 STRIP 3: FIX THE C1 IN A PROPER POSITION 4: IF NEEDED, USE TWO TIE WRAPS Hourmeter C1 – User Manual rev. 04 ATHENA EVOLUTION srl Web: www.getdata.it [email protected]...
WARNING: partial hours counter could increase differently from the total hours counter. This behaviour is related to the moment when the reset is done. C1 visualizes tens of minutes but, in reality, internal counter is divided in to singles minutes. Hourmeter C1 – User Manual rev. 04 ATHENA EVOLUTION srl Web: www.getdata.it [email protected]...
Página 5
Keep pushing S button until you see ” - - - - ” blinking. • Release S button: display will auto-switch off after a few seconds and the partial hours counter is resetted. RELEASE “S” KEEP PUSHING “S” Hourmeter C1 – User Manual rev. 04 ATHENA EVOLUTION srl Web: www.getdata.it [email protected]...
Página 7
Para mayor información, dirigirse a la oficina de la ciudad de residencia encargada del servicio de eliminación de desechos urbanos o a la tienda donde se adquirió el producto. Hourmeter C1 – User Manual rev. 04 ATHENA EVOLUTION srl Web: www.getdata.it...