Metra 99-7010 Instrucciones De Instalación

Mitsubishi eclipse/ eclipse spyder 2006-2012
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

INSTALLATION INSTRUCTIONS FOR PART 99-7010
Mitsubishi Eclipse/Eclipse Spyder 2006-2012
KIT FEATURES
• DIN radio provision with pocket
• ISO DIN radio provision with pocket
• Double DIN radio provision
• Painted silver to match factory dash
KIT COMPONENTS
• A) Radio housing • B) ISO brackets • C) ISO trim plate • D) Double DIN bracket • E) Pocket
• F) Double DIN trim plate
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • MITO-01 - Mitsubishi amp interface 2006-up • 70-7001 - Mitsubishi 1992-up
Antenna Adapter: • Not required
TOOLS REQUIRED
• Phillips screwdriver • Small flat blade screwdriver
METRA. The World's best kits.
99-7010
C
D
1-800-221-0932
E
F
metraonline.com
Table of Contents
- Radio housing assembly....................................... 2
- DIN radio provision with pocket ............................ 3
- ISO DIN radio provision with pocket ...................... 3
- Double DIN radio provision ............................ (back)
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
© COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
Tabla de contenido
loading

Resumen de contenidos para Metra 99-7010

  • Página 5: Componentes Del Kit

    INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-7010 Indice Mitsubishi Eclipse/Eclipse Spyder 2006-2012 99-7010 Desmontaje del tablero – Mitsubishi Eclipse/Eclipse Spyder 2006-2012 ..2 CARACTERÍSTICAS DEL KIT Ensamble del kit • Provisión de radio DIN con bolsillo • Provisión de radio ISO DIN con bolsillo –...
  • Página 6: Desmontaje Del Tablero

    2. Quite los (4) tornillos Phillips que luces intermitentes en la carcasa sujetan el chasís del radio al tablero y retire. (Figura B) del radio 99-7010. (Figura B) 3. Desenganche y quite las rejillas del aire Continúa en la página (Figura B) acondicionado del panel de la moldura del radio de fábrica.
  • Página 7: Provisión De Radio Iso Din Con Bolsillo

    4. Ubique el arnés del cableado (Figura A) (Figura A) carcasa del radio. (Figure B) de fábrica en el tablero. Metra recomienda usar el adaptador de 5. Ubique el arnés del cableado acoplamiento adecuado de Metra de fábrica en el tablero. Metra recomienda usar el adaptador de o AXXESS.
  • Página 8: Provisión De Radio Doble Din

    INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-7010 Provisión de radio doble DIN 1. Corte la costilla de la barra central. (Figure A) 2. Deslice el soporte correspondiente en la carcasa del radio, alineando los orificios de la carcasa con los orificios del soporte.

Tabla de contenido