Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
ÉPIX™ Strip 2.0 QRG
Power/Signal Connection Procedure
The ÉPIX™ Strip 2.0 uses an RJ45 connection to link all ports. Each strip can be linked
from end-to-end never exceeding a total of 4 strips for each daisy chain. The following
diagram illustrates how to configure the data connections.
Correct
Incorrect
Never connect both data ports on the same end of the strip.
Page 9
ÉPIX™ Strip 2.0 QRG Rev. 2
Tabla de contenido
