Alto Professional TX208 Guia Del Usuario página 7

Features
Rear Panel: TX208 & TX210
1. AC Input: Use the included power cable to connect this
input to a power outlet. Make sure the Power Switch is
set to off when connecting or disconnecting the cable.
2. Fuse: If the unit's fuse is broken, lift this tab to replace
the fuse. Replace it with a fuse with an appropriate
rating (printed under the unit's power cable input).
Using a fuse with an incorrect rating can damage the
unit and/or fuse.
3. Power Switch: Use this switch to power the
loudspeaker on or off. Make sure the Volume knob is
set to its minimum (counterclockwise) position before
turning it on.
4. Power LED: This LED lights up when the loudspeaker
is on.
5. Cooling Vent: Keep the area in front of this vent clear
from obstructions. The fan behind the vent cools the
amplifier, preventing overheating.
6. Volume: Turn this knob to adjust the loudspeaker's
volume.
When using an audio source such as a mixer, CD/MP3
player or audio preamp, follow the outer/Line level band
indicator. In most circumstances, you will not need to
turn the volume beyond 0 dB. If your audio source has
unusually low output, you may turn the Volume knob
past 0 dB, but not past the Signal Limit indicator.
When using a microphone or instrument audio source,
follow the inner/Mic level band indicator. Because the
mic and instrument level is typically lower than a line
level, you can use the full rotation of the Volume knob.
Please see Setup > Volume Control
7. Input: Use a standard XLR cable (not included) to
connect your audio source to this input. Make sure to
set the Volume knob to the correct position.
8. Mix Out: Use a standard XLR cable (not included) to
connect this
loudspeaker (i.e., another TX2 loudspeaker).
9. Signal/Limit LED: This LED lights up green when an
audio signal is sent to the loudspeaker—it flashes at
lower levels and lights solidly at higher levels. The
LED lights up red when output limit/protection is
active—if the LED is lit red continuously, reduce the
volume of your audio source.
output to the input
to learn more.
of another
9
7 8
4
5
5
2
3
6
1
7