Tabla de contenido
LINE ARRAY
SAFETY
The flying of cabinets should be performed only by properly qualified persons, in compliance with all local laws and using
approved hardware.
It is the installers responsibility to ensure the point of fixing is structurally adequate to support the weight of the
cabinets.
The rigging or suspended mounting of these speakers can expose members of the public to serious health risks or even
death.
Under no circumstances attempt to rig, suspend or otherwise mount this system unless you are fully qualified and certified
to do so by relevant local, state and national authorities. All relevant safety regulations must be followed. If you are not
properly qualified or do not know of pertinent regulations, consult qualified personnel for advice and assistance.
For added safety, it is strongly recommended that the audio connections, mechanical fixing and mounting bracket are
checked periodically.
PLEASE SEE THE TNA-1200S / TNA-2051 USER MANUAL FOR
INFORMATION REGARDING CABINET TILT ANGLE AND
SIDE BRACKET HOLE ASSIGNMENT.
SPECIFICATION
Suspension Type
Mounting Type
Unit dimensions (HWD)
Unit weight
Carton dimensions (HWD)
Packed weight
In the interest of continued development, HH reserves the right to amend product specification without prior notification.
© 2019 HH Electronics Ltd
W
H
Model
: TNA-BRK1
: The bracket allows you to fit upto three D-shackles (included)
: Five M8 mounting points hold the bracket securely to the cabinet
: 64 x 451 x 360mm, 2.5" x 17.8" x 14.2"
: 2.8Kg, 6.2 lbs
: 124 x 511 x 420mm, 4.9" x 20.1" x 16.5" , 0.027 M3
: 4Kg, 8.8 lbs
Designed and Engineered in the UK by HH Electronics LTD.
TWO TNA-1200S
D
FOUR TNA-2501
ARRAY
TNA-BRK1 MAXIMUM
SUPPORT LIMIT
5
Tabla de contenido
