NIOSH RPB T-LINK Manual De Instrucciones página 13

SUPPLIED AIR
FIGURE 4.1
Connect the Breathing Air Supply Hose to the
point of attachment (04-900 Radex
Filter) shown.
!WARNING! Make sure that the air from
the point of attachment is Grade D or higher
quality and meets OSHA requirements.
FIGURE 4.3
Now connect the Breathing Air Supply Hose
to the Flow Control Device. Air should be now
flowing through the Respirator.
FIGURE 4.2
Connect the Breathing Tube to the flow
Airline control device.
®
NOTE:
Check the hose connections for any
air leaks and tighten if necessary – replace
any worn parts.
FIGURE 4.4
With air flowing through the respirator adjust
the air pressure at the point of attachment to
the recommended pressure as specified in
the Breathing Air Pressure Table (page 10).
13