Promax OP-009-PS Manual De Instrucciones página 30

Step 3.- Printing the Certification Report
1.- Connect the TV EXPLORER
installed (if you have not installed the program NetUpdate3, download it free
of charge on the PROMAX website).
2.- Run NetUpdate3.
3.- Now in the NetUpdate3 program, click on the Detect button.
4.- The program has to communicate with the instrument and detect the model.
5.- Click on the button "Advanced Utilities".
6.- Click on the tab "Datalogger".
7.- In the "Equipment" window select the datalogger file which has been created
during the measurement and click on the button "Send to PC".
8.- The file goes to the PC's hard drive and appears in the "PC" window.Then tick
the check box next to the file name.
9.- Tick the check box "Generate Report" and select on the drop-down menu the
type of report and click on the "View" button.
10.- A window with measurement data appears. Set the printing configuration and
click on "Generate Report".
11.- The certification report is generated with the measurement data.
Page 10
User's Manual OP-009-PS
HD to the PC where the program NetUpdate3 is
09-2012