CefarCompex Mi-Theta 600 Manual Del Usuario página 16

ENG
10a
10e: In this example the
channel 4 indicates that the
cable is connected to the stimulator on
channel 4. The figures in channel 4 will
automatically change during the test as
the sensor record different measure-
ments.
NOTE:
When several sensors are connected
simultaneously, the
performed progressively, one
connected channel after the other. The
channel being scanned is easily identi-
fied by its changing numbers and the mi
logo above the channel. The 4 +/- but-
tons will be disabled for the duration of
the test.
10a: Press the On/Off button to
interrupt the test at any moment. To
relaunch the test from the start, press
any of the 4 +/buttons.
Press the On/Off button a second time
to return to the list of programmes.
Once the test is complete, you will
automatically be taken to the default
programme start screen and prompted
to increase the stimulation energies.
18
7b 7c 7d 10e
logo above
test is
Adjusting stimulation energies
When you start a programme, you will
be prompted to increase the stimulation
energies. This is the key to the success
of any treatment.
Session duration
(in min.)
11a 11b 11c 11d
Heat waves depicting
the warm-up sequence
11a: Press the On/Off button to return
to the previous screen.
11 b c d e: The unit will beep and the
symbols for the 4 channels will alternate
between + and 000. The energy level
for the 4 channels is at 0. To start the
programme, you will need to increase
the energy levels in the channels you
are going to use. To do this, use the cor-
responding + buttons.
NOTE: If you want to increase the
energy levels in all 4 channels simultane-
ously, press the i button. Press it twice
to increase the levels in the first 3 chan-
nels, and 3 times to increase the levels
in the first 2 channels. Interdependent
channels will be highlighted in white
against a black background.
11e