Craftsman 917.37752A Manual Del Propietário página 7

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Theoperation of anylawnmowercan
resultin foreignobjectsthrownintothe
eyes, which can result in severe eye
damage.
Always wear safety glasses or
eye shields while operating
your lawn
mower or performing
any adjustments
or
repairs.
We recommend
a wide vision
safety mask over the spectacles
or
standard safety glasses.
HOW TO USE YOUR
LAWN
MOWER
CAUTION:
Do not run your lawn mower
without mulcher plate in place and door
closed or without an approved
clipping
deflector
or grasscatcher
in place.
Never
attempt to operate the lawn mower with
the rear door removed
or propped open.
ENGINE SPEED
The engine speed was set at the factory
for optimum performance,.
Speed is not
adjustable_
ENGINE ZONE CONTROL
CAUTION:
Federal
regulations
require
an engine control to be installed on this
lawn mower in order to minimize
the risk
of blade contact injury, Do not under any
circumstances
attempt to defeat the
fiJncUon of the operator
control, Tlie blade
turns when the engine is running
,, Your lawn mower is equipped with an
operator presence control bar which
requires the operator to be positioned
behind the lawn mower handle to start and
operate the lawn mower-
TO ADJUST CUTTING HEIGHT
o Raise wheels for low cut and lower wheels
for high cut..
,, Adjust cutting height to suit your require-
ments. Medium position is best for mosl
lawns.
,, To change cutting height, squeeze adjuster
lever toward wheel. Move wheel up or
down to suit your requirements. Be sure all
wheels are in the same setting,
NOTE:
Adjuster
is properly
positioned
when plate tab inserts into hole in lever.
Also, 9-position
adjusters
(if so equipped)
allow lever to be positioned
between the
plate tabs.
Piale l"ab
Lower Wheels for High Cut
t
,_}_
_'_
_
__
Lever
Raise Wheels for Low Cut
TO ATTACH
GRASS CATCHER
• Close the flip lid.. Flip lid must be closed
while operating lawn mower,
o Lift the rear door on the mower housing and
place 1he grass catcher frame onto the
formed tabs on the rear door hinge bracket_
• The grass catcher is secured to tile lawn
mower housing when the rear door is
lowered onto the grass catcher frame.,
CAUTION:
Do not run your lawn mower
without chipping deflector
or approved
grass catcher in place,
Never attempt to
operate the lawn mower with the rear door
_emoved or propped
open,
Hinge
Rear door
Formed
tabs
TO EMPTY GRASS CATCHER
o To remove grass catcher, release operator
presence control bar to stop engine.,
• Lift up rear door and remove the grass
catcher by the handle,
, Do not drag the bag when emptying; it will
cause unnecessary wear.
7
Tabla de contenido
loading

Tabla de contenido