Maytag MDB8989SHBK Manual Del Usario página 8

To remove the rack:
To gain access to the removable tabs on the tracks/rails, pull the
upper rack forward about halfway out of the tub.
On one side, press the tab on the track in and pull up the front
end of the rack out of the track. Then repeat this step on the
other side to completely remove the front end of the rack.
Then remove the rack by pulling the back end out using a
forward and upward motion.
To replace the rack:
Pull the tracks forward about halfway out of the tub. Along the
sides of the racks are round attachment tabs. Align the rack's
back end attachment tabs with the cutout in the track. Push
down into place. Pull the tracks completely out, and align the
rack's front-end attachment tabs with the cutout in the track.
Push down into place. You will hear a snap when the front end of
the rack is secured into place on each side.
Removable Top Rack CC-RAIL (On some models)
The removable top rack allows you to wash larger items such as
pots, roasters, and cookie sheets in the bottom rack.
IMPORTANT: Remove dishes prior to removing the top rack
from the dishwasher.
To remove the rack
1. To gain access to the track stops, pull the upper rack
forward about halfway out of the tub.
2. To open, flip the track stop toward the outside of the tub.
3. After opening both track stops, pull top rack out of the rails. 4. Close track stops and slide the tracks back into the
dishwasher.
To replace the rack
1. Gently pull tracks forward in dishwasher until they stop.
Open track stops.
2. Place the back wheels on each side of the rack into the track
slot and roll them back into the tracks, but do not push the
rack all the way into the tub.
8
3. Insert front rack wheels on each side of the rack into the
track slots. 4. Slide rack into the dishwasher. The stops will automatically
close when rack enters dishwasher.
Easy To Remove Third Level Rack (On some models)
If additional space is needed in the upper rack, the third level
rack can easily be removed.
A. Track stop
Culinary Tool Rack (Third level rack, on some models)
The culinary tool rack is designed with 2 movable baskets to hold
extra silverware, knives and cooking utensils. Install the baskets
in this up position when you have extra silverware and flatware to
wash.
Install the baskets in this down position when you have extra
silverware, knives, or utensils requiring more room to wash.
IMPORTANT: When you are using the culinary tool baskets
in the down position, the top rack must also be in the lowest
position.
Down position
Remove the front basket when you are using the cup shelves or
have other tall items in the top rack for more room.
B. Track
Up position