Starting The Robot - Amibot Xline AGX50 Manual De Usuario

EN
Operating the appliance
Placing the robot on the surface to be cleaned
Figure 1
Place the appliance on the surface that you wish to clean with a
clearance of at least 10 cm from any obstacle (Figure 1).

Starting the robot

Press the Start/Pause button on the appliance (Figure 1) or the Start
button on the remote control (Figure 3). The robot starts its cleaning
cycle (Figure 2).
NOTES:
• The robot must always be plugged in. If the electricity fails, the back-up battery
takes over and keeps the appliance on the surface for 30 minutes maximum.
• Let go of the appliance when it is securely attached to the surface.
• The top indicator lights are blue, green and white and the bottom indicator light
is blue when the appliance is working correctly.
10 cm
12
Figure 2