Cleaning - Bartscher 2000D I Manual De Usuario

•
Height of patio heater can be regulated (1,80 to 2,10 m). In order to effect this, pull up
the extension pipe
Next, set extension pipe, turning the base casting
•
In order to switch off device, pull the pull switch with heat-level indicator repeatedly,
until „0" becomes displayed on the indicator. Next, disconnect device by pulling the
plug out!

6. Cleaning

WARNING!
Disconnect the device from the power supply
(unplug!) before cleaning. Let the device cool down.
Never clean the device with use of water jet!
Be careful and do not let the water into the device.
CAUTION!
Never use aggressive or abrasive cleaning agents.
Do not use flammable cleaning agents (e.g. gasoline or solvents)!
Do not use sharp or pointed objects.
o Clean the device regularly.
o After long use, reflector may collect dust. Remove dust using a brush.
o Following device use, if necessary, dry cleanse device with a soft cloth.
o Only use a soft cloth and never use rough detergents which could scratch the
surface of the device.
o Store device in a dry place. Before storing device, make sure device is properly
cleansed.
③
from the upper pipe stand
⑦
, until desired height is reached.
⑥
in order to effect this.
- 31 -