How To Measure - DeFelsko PosiTest AT Guia De Incio Rapido

PosiTest AT-A
Touch Screen Display
Use the touch screen to interact with menu options. Swipe
horizontally to navigate between views or vertically to move
between batch readings. Alternatively, the directional buttons can
be used for navigation.
Main View (shown with memory batch open)
Pull Chart
displays
pressure
over time
Dolly
Size
Pull Rate
Prepare the Instrument
1. Push the actuator handle completely down into the actuator
assembly. Place the actuator over the dolly head and attach
the quick coupling to the dolly by reaching through the holes
in the actuator and lifting the coupling. Release the quick
coupling when the dolly head is completely engaged.
2. Press the
3. Verify Pull Parameters (pg. 11) are set to the preferred dolly
size, pull rate, pull limit and hold time. Change if necessary.
NOTE:
The 50x50 square dolly size is used for testing tile
adhesion and should NOT be used when testing with 50mm
round dollies.
NOTE:
If recording of test results is desired, a memory batch
must be opened prior to the test. Select New Batch from the
Memory menu (pg. 11).
indicates the current view. Swipe horizontally
Carousel:
or use arrow keys to switch between views.
Hold Time
Limit
Pull Parameters (pg.11)

How to Measure

button to power-up the instrument if necessary.
WiFi Bluetooth USB
(Status icons)
8
(see pg.10)
Current
Reading
Battery