Restoring The Factory Settings - Kichler 12217 Manual Del Usario

OPERATION
Photo Eye TEST Function:
This setting allows you to test your landscape lighting after installation and
programming is completed:
NOTE: When using the TEST function during daylight hours, be sure to
completely cover the PHOTO EYE for the lights to turn on. The photo eye needs
to sense darkness in order to function, even in TEST mode.
NOTE: In TEST mode, the display and LED indicator lights on the transformer
turn off after approximately 10 seconds of idle time.
a) Press MENU until the Green TEST LED indicator is lit and then press ENTER.
The lights should turn on within a couple seconds after covering the Photo Eye.
It will take 30 seconds for the light to turn off after the Phot Eye is exposed to
light.

Restoring the Factory Settings:

To clear all programming and restore the transformer to its original factory
settings, press and hold the ENTER button for 3 seconds.
The display shows 88:88 and after 1 second resets the CLOCK to 12:00 AM.
Rev. 09-09-19
12
Printed in China
Kichler® is a registered trademark of
The L.D. Kichler Co. All Rights Reserved