Hardware Installation Procedures; Rs-232 Cable / Ac Power Installation - HandHeld Transaction Team TT8500 Guía De Arranque

Hardware Installation Procedures

Before you begin the installation process, you need to determine what type of
cable you will be using (see

RS-232 Cable / AC Power Installation

1. Make sure the power switch is turned off on the computer where you will be
installing the TT8500.
2. Plug the 15-pin connector (HDB15) of the serial cable into the underside of
the TT8500.
3. Plug the 9-pin
port on your POS terminal/computer (usually COM port 1).
4. Plug the female connector of the AC power supply cable into the socket on
the back of the 9-pin serial cable connector (DB9), which is plugged into the
back of your POS terminal/computer.
5. Plug the AC power supply into a power outlet.
Installation is now complete. You may now turn on your computer. Your TT8500
will auto-configure to RS-232.
1. If your computer has a 25-pin serial port, you will need to obtain a 25-pin to 9-pin adapter
from your local computer store or other source.
I-4
Cables
1
connector (DB9) of the serial cable into an available serial
on page 3 for cable options).
2. Plug HDB15
connector
into TT8500
Transaction Team™ TT8500
Host
3. Plug DB9 connector
into host
4. Plug AC power adapter
into DB9